Nowadays, environmental pollution is quite severe, inevitably leading to an increase in suspended solids in the air, and the air quality is not as good as before. If there are more particles and suspended solids in the air, it will affect our normal life and work. So in order to better avoid harmful substances in the air, the application of primary filters in daily life has been loved and introduced by people. The following is the product characteristics and maintenance of primary filters. Let's learn how to maintain primary filters together!

The non-woven fabric is laid flat inside the frame, and the initial effect plate filter is fixed with double-sided metal mesh. Suitable for normal use in environments with limited environmental conditions and high air volume. Used to capture particles, dust, and various suspended solids above 2 meters. Filtering efficiency levels: G1, G2, G3

The initial efficiency plate filter features a sturdy aluminum alloy frame and diamond protective mesh on the wind surface, ensuring that the filter will not deform or be damaged in harsh working environments. Lightweight panel structure. The filter element is made of high-quality polyester synthetic fiber, which can be cleaned and reused multiple times. It has a long service life, is economical, and has a rich and dense fiber structure, which can ensure high dust rate and large capacity, effectively extending the service life of the back-end medium efficiency filter element. 1 inch (21mm, 25mm) available in various thicknesses, with filtration levels of G2, G3, G4 (EN779)

The initial efficiency plate filter is replaced regularly according to the cleanliness of the environment (super efficiency filters are generally replaced every 1-6 months). Regularly (usually once every two months) use a dust particle counter to measure the cleanliness of the purified area of the product. If the measured cleanliness does not match the required cleanliness, the cause should be identified (such as leakage, failure, etc.). If the filter has failed, a new filter needs to be replaced.

The primary efficiency plate filter mainly filters dust above 5um and is used for pre filtration in air conditioning and ventilation systems to prevent dust pollution inside the system. At the same time, the initial effect filter adopts a large air compressor pre filter, a clean room central ventilation and ventilation filter, which extends the service life of the subsequent effective filter. In fact, primary filters are also used in ventilation systems of general industrial factories to meet the general cleaning needs of the air.

Initial efficiency plate filters are divided into super efficiency plate filters, super efficiency folding filters, super efficiency cardboard box filters, super efficiency nylon mesh filters, super efficiency bag filters, etc. As a pre filter of the air filter, it can effectively block dust particles in the air, protect the intermediate and effective filters at the back end. The service life of a high-quality super efficiency filter in a normal environment is 2-4 replacements to prevent the impact of clogged filter surfaces on air quality. We still need to pay attention to the replacement cycle.

The initial efficiency plate filter has a better effect on filtering harmful substances in the air, so it can be welcomed and accepted by everyone in daily life. If you use a primary filter, you can refer to the maintenance and repair of the primary filter introduced by the editor above to better extend the service life of the primary filter.

The above introduction is about how to maintain the primary efficiency plate filter. If you need to know more, please feel free to contact us at any time!